Mains Powered Heat Alarm with 10 Year Lithium Battery Back Up

Red LED flashes every 48 second for normal operation.

Green LED shows mains power on.

Low Battery Indication: A short acoustic “beep” will sound and LED flash every 48 seconds when the voltage is below 2.85V. In this stage it will continue for minimum 30 days, and can drive the alarm for 4 minutes.

Sound Pattern: Heat alarm condition is indicated by a series of three successive tones.

Visible Indicators: A red LED is used to indicate the following conditions:

In normal mode the LED will flash every 48 seconds to show correct operation When a rapid change of temperature is detected, the heat alarm will go into ‘Alarm Mode’. It will sound the alarm signal or the LED will flash rapidly A green LED is used to show the alarm is powered by mains supply

The heat alarm includes a push button switch built into the top of the alarm for easy access.

The pushbutton has the following functions:

set up - press the button to start sending out a specific house code to the others alarms hush – during an alarm condition this immediately silences the alarm when pressed. When the button is released, the alarm remains silenced for 10 minutes test – when not in alarm the sounder can be activated to provide a sensor OK test function. While the button is pressed, the audible and visible indicators are activated if the sensor is OK

Designed for installation in private homes or garages with risk for smoky, dusty or humid environment, as for example kitchen and garage area.
This alarm can be connected with other alarms from the CAVIUS Wireless alarm family or function as a stand alone alarm.

Placed max 5,3 meters away from any heating source

The alarm makes a reading every 2 seconds